Some Special Aircraft

Journal of Aircraft and Spacecraft Technology 2017, 1(3)

18 Pages Posted: 22 Nov 2017

See all articles by Relly Victoria Petrescu

Relly Victoria Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM

Raffaella Aversa

Advanced Material Lab - Department of Architecture and Industrial Design

B. Akash

American University of Ras Al Khaimah

Juan Corchado

University of Salamanca

Filippo Berto

Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials

Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design

Florian Ion Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM

Date Written: November 19, 2017

Abstract

In this study, the authors want to present a few more distinct aircraft from a constructive and functional point of view. Their role has often been determined by the need to achieve or fulfill certain more or less strategic objectives. Such ships will also be built in the future more and more often in order to be able to respond to all new flight requirements and to meet, under optimal conditions, the new and increasingly demanding requirements. Many of the new special aircraft have been built so far to achieve special tasks, or at the request of the defense ministry in some highly developed countries, even with the United States of America. The PA-23 was the first twin-engine design from Piper and was developed from a proposed "Twin Stinson" design inherited when Piper bought the Stinson Division of the Consolidated Vultee Aircraft Corporation. The prototype PA-23 was a four-seater low-wing all-metal monoplane with a twin tail, powered by a two 125 hp Lycoming O-290-D piston engines the prototype first flew 2 March 1952. The aircraft performed badly and it was redesigned with a single vertical stabilizer and an all-metal rear fuselage and more powerful 150 hp Lycoming O-320-A engines. Two new prototypes of re-designed aircraft now named Apache were built in 1953 and entered production in 1954; 1,231 were built. In 1958, the Apache 160 was produced by upgrading the engines to 160 hp (119 kW) and 816 were built before being superseded by the Apache 235, which went to 235 hp (175 kW) engines and swept tail surfaces (119 built). In 1958 an upgraded version with 250 hp (186 kW) Lycoming O-540 engines and adding a swept vertical tail was produced as the PA-23-250 and was named Aztec. These first models came in a five-seat configuration which became available in 1959. In 1961 a longer nosed variant the Aztec B entered production. The later models of the Aztec were equipped with IO-540 fuel injected engines and six-seat capacity and continued in production until 1982. There were also turbocharged versions of the later models, which were able to fly at higher altitudes. The US Navy acquired 20 Aztecs, designating them UO-1, which changed to U-11A when unified designations were adopted in 1962. In 1974, Piper produced a single experimental PA-41P Pressurized Aztec concept.

Note: © 2017 Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, Antonio Apicella and Florian Ion Tiberiu Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Suggested Citation

Petrescu, Relly Victoria and Aversa, Raffaella and Akash, B. and Corchado, Juan and Berto, Filippo and Apicella, Antonio and Petrescu, Florian Ion, Some Special Aircraft (November 19, 2017). Journal of Aircraft and Spacecraft Technology 2017, 1(3), Available at SSRN: https://ssrn.com/abstract=3073988

Relly Victoria Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM ( email )

Romania

Raffaella Aversa

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

B. Akash

American University of Ras Al Khaimah ( email )

American University of Ras Al Khaimah
School of Graduate Studies and Research
Ras Al Khaimah, RAK 10021
United Arab Emirates

HOME PAGE: http://www.aurak.ac.ae

Juan Corchado

University of Salamanca ( email )

Campus Miguel de Unamuno
ES-37007 Salamanca, Salamanca 23007
Spain

Filippo Berto

Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials ( email )

Trondheim
Norway

Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

Florian Ion Petrescu (Contact Author)

Polytechnic University of Bucharest - ARoTMM-IFToMM ( email )

Romania

Do you have negative results from your research you’d like to share?

Paper statistics

Downloads
371
Abstract Views
2,405
Rank
148,413
PlumX Metrics