Дискретно-событийная модель расчета продолжительного производственного цикла изготовления партии деталей (Discrete-Eventing Model of Calculation of the Duration of the Production Cycle of Manufacturing a Part Products)

Научные ведомости Белгородского государственного университета. Белгород: БГУ. - 2019. – том 46. № 2. - С. 326-336 –Available at: DOI: 10.18413/2411-3808-2019-46-2-326-336

11 Pages Posted: 9 Jul 2019

See all articles by Oleh Pihnastyi

Oleh Pihnastyi

National Technical University "Kharkiv Polytechnic Institute"

George Kozhevnikov

National Technical University "Kharkiv Polytechnic Institute"

Date Written: July 5, 2019

Abstract

Russian Abstract: В статье рассматривается метод расчета продолжительности производственного цикла изготовления партии деталей. Производственный цикл изготовления партии деталей является одной из основных характеристик производственной системы, используется для расчета важных показателей планирования производственной деятельности предприятия. В настоящее время задача расчета продолжительности производственного цикла для несинхронизированных поточных линий остается актуальной. Особую актуальность она принимает в случае, когда время обработки предмета труда на технологической операции является случайной величиной. Анализу данного случая и посвящена настоящая работа. Для вывода уравнения движения предметов труда по технологическим операциям использована дискретно-событийная модель производственного процесса. Рассмотрена структура времени обработки предмета труда на технологической операции. Показан источник изменения величины межоперационных заделов на каждой технологической операции. Проанализирована взаимосвязь траекторий движения предыдущего и последующего предметов труда. Записано уравнение движения предмета труда по технологическим операциям с учетом межоперационных заделов и предложены методы его решения. Рассмотрены условия применимости полученных результатов. Проведен анализ затрат машинного времени, необходимого для расчета продолжительности производственного цикла изготовления партии продукции для предприятий полупроводниковой промышленности.

English Abstract: The method of calculating the duration of the production cycle for manufacturing a batch of parts is considered. The production cycle of manufacturing the batch of parts is one of the main characteristics of the production system. It is used to calculate the important indicators of planning the production activity of the factory. At present, the task of calculating the duration of the production cycle for unsynchronized production lines remains relevant. The task takes on special relevance in the case when the processing time of a work item in a technological operation is a random quantity. The present work is devoted to the analysis of this case. To derive the equation of motion of labour objects for technological operations, a discrete-event model of the production process is used. The structure of the processing time of an object of labour on a technological operation is considered. The source of change in the value of inter-operational stocks at each technological operation is shown. The interrelation of the trajectories of the previous and after subjects of labour is analyzed. The equation of motion of a subject of labour on technological operations is recorded, taking into account the inter-operational stocks. Methods for its solution are proposed. Conditions for the applicability of the obtained results are considered. The analysis of the machine time spent on calculating the duration of the production cycle of manufacturing the batch of products for the factory of the semiconductor industry was carried out. Prospects for research have been determined.

Note: Downloadable document is in Russian.

Keywords: production, work in progress, production line, subject of the labor, production cycle, discrete event model, stochastic process, production management systems

JEL Classification: C02, C15, C25, C44, D24, L23, Q21

Suggested Citation

Pihnastyi, Oleh and Kozhevnikov, George, Дискретно-событийная модель расчета продолжительного производственного цикла изготовления партии деталей (Discrete-Eventing Model of Calculation of the Duration of the Production Cycle of Manufacturing a Part Products) (July 5, 2019). Научные ведомости Белгородского государственного университета. Белгород: БГУ. - 2019. – том 46. № 2. - С. 326-336 –Available at: DOI: 10.18413/2411-3808-2019-46-2-326-336, Available at SSRN: https://ssrn.com/abstract=3415712

Oleh Pihnastyi (Contact Author)

National Technical University "Kharkiv Polytechnic Institute" ( email )

Kharkiv
Ukraine

George Kozhevnikov

National Technical University "Kharkiv Polytechnic Institute" ( email )

2, Kirpichov st.
Kharkiv, 61000
Ukraine

Do you have negative results from your research you’d like to share?

Paper statistics

Downloads
63
Abstract Views
440
Rank
627,735
PlumX Metrics