Explicit Dynamic Analysis of Tensional & Torsional Propagations on Composite Material with Dog Bone Shaped Testing Specimen

International Journal for Modern Trends in Science and Technology ISSN: 2455-3778 :: Volume: 05, Issue No: 08, August 2019

14 Pages Posted: 4 Sep 2019

See all articles by Yedla Gopala Rao

Yedla Gopala Rao

Srinivasa Institute of Engineering & Technology, Amalapuram, A. P., INDIA

M. R. S. Nataraj

Srinivasa Institute of Engineering & Technology, Amalapuram, A. P., INDIA

P. Srinivas

Srinivasa Institute of Engineering & Technology, Amalapuram, A. P., INDIA

Date Written: August 27, 2019

Abstract

In general the composite are made by percentage of mixed or arrangement or concentration of material properties to increase the strength and advantages of the materials. Toeliminate the holding and gluing problems making the direct tensile strength test hard and torsional momentum loads to be applied, a new method of testing specimens prepared using 3d designing CATIA software to make the dog bone shape is assessed whether it could be applied to determine accurate direct tensile strength values and torsional loads over al alloy materials. In the project, i here considered 3 conditions, High percentage of aluminum alloy and low percentage of the silicon, Low percentage of aluminum alloy and high percentage of the silicon and Balanced percentage of aluminum alloy and silicon A series of modeling and analysis was performed using finite element method (ansys workbench) to investigate the deformation and stress to change of effect by material properties. A proper mechanical material property of the specimens was suggested and ideal failure of the dog bone shaped specimens was determined according to the results obtained from this study.

Keywords: IJMTST

Suggested Citation

Rao, Yedla Gopala and Nataraj, M. R. S. and Srinivas, P., Explicit Dynamic Analysis of Tensional & Torsional Propagations on Composite Material with Dog Bone Shaped Testing Specimen (August 27, 2019). International Journal for Modern Trends in Science and Technology ISSN: 2455-3778 :: Volume: 05, Issue No: 08, August 2019, Available at SSRN: https://ssrn.com/abstract=3443709 or http://dx.doi.org/10.2139/ssrn.3443709

Yedla Gopala Rao (Contact Author)

Srinivasa Institute of Engineering & Technology, Amalapuram, A. P., INDIA

India

M. R. S. Nataraj

Srinivasa Institute of Engineering & Technology, Amalapuram, A. P., INDIA

India

P. Srinivas

Srinivasa Institute of Engineering & Technology, Amalapuram, A. P., INDIA

India

Do you have negative results from your research you’d like to share?

Paper statistics

Downloads
175
Abstract Views
631
Rank
309,619
PlumX Metrics